LPT TO USB PRINTER SERIAL OR PARALLEL
LPT TO USB PRINTER INSTALL MY PRINTER

Lpt To Usb Printer Serial Or Parallel

Kabel USB to Paralel Printer. Kabel ini berfungsi untuk enghubungkan port paralel (LPT) di Printer ke usb laptop/pc komputer Anda. Which port is suitable for connecting a USB printer For a printer connected to the computer via USB, the Port should be set to USB Virtual Printer Port (such as USB001, USB002). For a printer connected to the computer via Parallel, the Port should be set to LPT1 (or LPT2, LPT3 if you have more than one Parallel interface port on your computer).I have a computer that does not have an LPT port, and the printer I want to use (EPSON Stylus Color 850) does not have a USB or Ethernet Port. I purchased a USB2LPT cable and have been trying to get the printer to work.The LPT2USB device is designed to interface the PC Parallel port to USB Printer Port, thereby enabling modern printers to work with the legacy applications.You can set your application to print to an ascii file, or you can let Printfil automatically capture one or more serial or parallel port (even from LPT1: to LPT9: and from COM1: to COM9: simultaneously), and redirect your DOS print jobs to any Windows printer, including USB, GDI, IP network printers, fax printers and PDF writers, even if a printer is physically connected to the captured port. Now Linux and DOS print to USB and all the newest all-in-one Windows-only printers.

Lpt To Usb Printer Install My Printer

Neither via USB nor via parallel port (LPT). In Sabayon or Gentoo, there is a toolbox for HP printers called hplip which is very easy to use: connect printer, detect it with hplip and you are ready to go.Now the issue is, that the hplip software does not recognize the printer. Now, I have a new computer without such a port and I'm not able to directly connect the printer.Therefore, I bought an USB-to-DB25-connector and tried to install my printer.But here the trouble starts.

A USB device which is an HP brand printer (not a adaptor/bridge behind which sits a printer) or The kernel driver for the PL2305 is not 'parallel-ish' enough to understand these, so returns an error code, which causes the HPLIP tools to skip that device node, in the process outputting more cryptic/useless diagnostics such as: Invalid device URIAs far as I can tell, HPLIP wants to see either: I defeated that by doing: sudo ln -s /dev/usb/lp1 /dev/parport1That could be made persistent using a custom udev rule, but it's an ugly hack.The next problem is that the HPLIP tools then (rightly) assume that /dev/parport1 is an lp device, and issue parallel-specific ioctls such as PPGETMODES on it. To defeat this, you have to run it from the command line and supply the device node as an argument.The next problem is that hp-setup only recognises the command-line argument as a parallel port device node (as opposed, for example, to a USB bus:device ID) if it is in the form /dev/partport. Comments elsewhere online said this would not work but as USB had already failed I decided to try it.The first problem you encounter with this approach is that hp-setup wants to scan rather than be told the device node to use. I suspect it was sniffing each device to see whether it smelt like an HP printer, deciding none were, and giving up.Secondly, I tried to set the printer up as a parallel printer.

Parallel logical connectionOnce all this is done, in either way, you need to setup a parallel printer. Being it a real one or a USB-adapted one is irrelevant.A USB printer is something totally different as it doesn't have a parallel/Centronics/IEEE-1284 port but natively uses the USB standard on either side of the connection. a USB-to-Centronics* adapter (which it seems you already own) andAs an option, you could have a USB printer adapter which terminates in a micro ribbon 36-pin male plug and which would connect directly a PC USB port to the printer's parallel socket.In either case, you are using a parallel port on your PC. That's normally called a parallel cable, a Centronics cable or a printer cable.So your physical setup requires two things:

In the end, I doubt I could have installed it through the GUI interface anyway. I was able to tunnel to the Raspberry Pi and use the CUPS web interface but try as I might, it wouldn't let me administer the printer. Your PC ' sees' a parallel port and you have to use that standard.If you had a USB printer, then you should have been setting up a USB printer because it's a USB-native printer (which covers most of the cases nowadays).I found this thread and tried everything here but it didn't work for me.HP Laserjet 5p (A freaking workhorse printer I didn't want to throw away.)My RPI is headless so I had to rely on the command line.

It can be a long list so whittle it down with a couple or three 'greps'For my LJ5P, it was this: (Syntax for the following 'lpadmin' command was important.) drv:///hp/hpcups.drv/hp-laserjet_5p.ppd HP LaserJet 5p, hpcups 3.21.6Install the printer using 'lpadmin': (You can name your printer whatever you wish with the '-P' switch.)Sudo lpadmin -p HP-LaserJet-5p -E -v socket:localhost -m drv:/hp/hpcups.drv/hp-laserjet_5p.ppdThis is where I found: direct usb://HP/LaserJet%205PStop cups and edit '/etc/cups/printers.conf' and replace the line for 'DeviceURI'. The cups documentation was very helpful for some of the command line stuff.Determine the list of printer drivers on your Pi. Though understand, I hacked at this for a couple of days.